Electrical Infrared Testing in Queens – Thermal Imaging Services

We offer electrical infrared testing in Queens NYC.

electrical infrared scanInfrared electrical thermography scans are used to perform preventive & predictive maintenance inspections on equipment because relationship with resistance on electrical equipment indicates electrical faults such as loose connections, overloaded or imbalanced circuits, faulty breakers, damaged switches, faulty fuses and a wide range of other unwanted electrical conditions.

Before an electrical component fails as result from heat, Isolate and repair electrical problems before they occur with our electrical infrared Inspections scans. Electrical Infrared testing is used to see the excess heat (resistance) so that problems can be conveyed to maintenance personnel, who can then act to correct the problem before the component fails, causing damage to the component.

Reduce interruption and increase revenues with Electrical Infrared Testing in Queens. Also reduce safety hazards and/or production downtime.

Theory: As electrical current flows through a conductor, heat is generated. Many electrical defects are accompanied by a rise in temperature for up to several weeks prior to failure. Some defects may be represented as cool components. Electrical Infrared Testing in Queens visually identifies these issues.

What Can Be Detected?

  • Inductive Heating
  • Harmonics
  • Defective Equipment

Benefits of Electrical Infrared Testing in Queens:

  • Locate problems quickly, without service interrupting
  • Drastically reduce costly, unscheduled power outages
  • Minimize preventive maintenance time and maximize troubleshooting effectiveness
  • Prevent premature failure and extend equipment life
  • Identify potentially dangerous and hazardous equipment
  • Reduce insurance premiums and deductible payments
  • Reduce Downtime
  • Liability- Lower Risks
  • No Disruption of Service
  • lower repair Costs
  • Increase Revenues
  • Save on Insurance
  • Prevent Catastrophic Failures
  • Safety and Dollars are the Bottom Line
infrared thermal imaging
electrical infrared thermal scan
infrared thermal imaging
infrared thermal imaging
infrared thermal imaging
infrared thermal imaging
infrared thermal imaging
infrared thermal imaging
infrared thermal imaging
infrared thermal imaging
infrared thermal imaging

We can perform Electrical Infrared Testing in Queens for the following:

  • Electrical distribution systems
  • Motor rebuilding
  • Dry or liquid-filled type transformers
  • Breaker control cabinets
  • Outdoor substations arrestors
  • Electrical Switchgears
  • Parallel Feed Conductors
  • Electrical A/C or D/C capacitors
  • Single phase power panels
  • Electrical UPS systems
  • Emergency power systems
  • Load Break Elbows
  • MMC Buckets
  • Lightning Arrestors
  • PLC cabinets
  • Lighting Circuit Breakers
  • Electrical Bus Ducts
  • Grounding systems

Electrical Infrared Testing

Electrical infrared testing in Queens (also called IR scans or IR surveys) for Preventive/Predictive Maintenance of electrical components is recognized by most industry professionals and insurance companies.

Thermal imaging or Electric Infrared Testing in Queens can detect hot spots in the electrical system not visible to the naked eye which may be a precursor to a larger issue. Therefore, we can inspect and locate issues before there is a costly outage.

Annual electrical infrared testing can increase safety and can be used by an insurance company to assess the potential risk of a commercial business.

We provide detailed, high-quality and easy to understand electrical infrared testing reports that thoroughly document our findings. The resulting report can be a great aid for electricians hired to repair the identified issues.

Infrared Predictive Maintenance (P/PM) Explained

Electrical Infrared testing in Queens, or thermography scans, are used to perform P/PM inspections on electrical equipment.

Excess resistance on electrical apparatus indicates electrical faults such as loose connections, overloaded or imbalanced circuits, faulty breakers, damaged switches, faulty fuses and a wide range of other unwanted electrical conditions.

Before an electrical component burns up, it heats up. Thermography is used to see the excess heat (resistance) so that problems can be found and maintenance personnel can act to correct the problem before the component fails, causing damage to the component, safety hazards and/or production downtime.

BUILDINGTECH INSPECTION SERVICES, LLC performs Electrical Infrared Testing in Queens as per  Infraspection Standard for Infrared Inspection of Electrical Systems & Rotating Equipment.

Request Your Electrical Infrared Testing in Queens Today

Our team is standing by to assist your Queens company to identify any risks and avoid costly outages. Contact us today.